Mirror Adjustment Switch

Switches

CAUTION!
Before beginning repairs on the electrical system:

• Obtain the anti-theft radio security code.

• Switch the ignition off.

• Disconnect the battery Ground (GND) strap.

• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.

• Steps after reconnecting voltage supply => Battery.

Mirror Adjustment Switch

Removing

- Remove front door trim:

- Remove bolts - arrows - at pull handle for closing on back side of door trim.





- Remove panel for pull handle for closing on front side, under mirror adjuster switch.

- Disconnect connector - 1 - at mirror adjuster switch - 2 -.





- Carefully release catches - arrows - using a small screwdriver.

- Pull mirror adjuster switch downward out from pull handle for closing.

Installing

Installation is reverse of removal, paying attention to the following:

- Press mirror adjuster switch into switch mount until catches engage.