Air Injection: Locations

Secondary Air Injection (AIR), Component Overview







1 - Secondary Air Injection (AIR) Pump Motor V101
- Component location
2 - Secondary Air Injection (AIR) Pump Relay J299
- Component location
3 - Motronic engine control module J220
4 - Right combination valve for Secondary Air Injection (AIR)
- Component location
5 - Secondary air injection (AIR) solenoid valve N112
- Component location
6 - Non-return valve
- Installed location: - Arrow - points in direction of flow, as shown in figure.
7 - To Intake manifold
8 - Left combination valve for Secondary Air Injection (AIR)
- Component location
9 - Vacuum reservoir
- Component location: In left front wheel housing behind wheel housing liner







Installation location of Secondary Air Injection (AIR) Solenoid Valve N112
- Front at intake manifold - arrow - .







Component location of Secondary Air Injection (AIR) Pump Motor V101
- At right front in engine compartment below long member.
1 - Secondary Air Injection (AIR) Pump Motor V101







Component location for Secondary Air Injection (AIR) Pump Relay J299
- In E-box, plenum chamber.
2 - Secondary Air Injection (AIR) Pump Relay J299
B - Secondary Air Injection (AIR) Pump Fuse S130







Secondary Air Injection (AIR) combi-valve
- At rear of cylinder heads.

NOTE: The left combination valve for Secondary Air Injection (AIR) is depicted in the illustration.