Lower B-Pillar Trim

Lower B-Pillar Trim





1 B pillar Trim

• Removal:

• for removing the lower B-pillar trim, the outer seatbelt anchoring point must not be removed.

- Unclip lower A-pillar trim at rear end. Refer to => [ Lower A-Pillar Trim ] Lower A-Pillar Trim.

- Remove upper B-pillar trim. Refer to => [ Upper B-Pillar Trim ] Upper A-Pillar Trim.

- Unclip lower clip - 2 - at rear end of B-pillar trim - 1 -.

- Pull lower B-pillar trim - 1 - upward until B-pillar trim disengages from belt guide - 4 -.

• Installing:

• Ensure that the belt webbing - 3 - is not jammed when installing trim.

- Guide pin - 5 - into hole on shell construction sill.

- Attach upper trim - 1 - to belt guide - 4 -.

- Secure lower rear trim - 1 - with clip - 2 -.

- Clip lower A-pillar trim again at rear. Refer to => [ Lower A-Pillar Trim ] Lower A-Pillar Trim.

- Install upper B-pillar trim again. Refer to => [ Upper B-Pillar Trim ] Upper B-Pillar Trim.

After assembling trim, make sure seal is properly fitted.

2 Clips

3 Belt Webbing

4 Belt Guide

5 Pins