Headlamp Range Control

Headlamp Range Control

CAUTION!
Before beginning repairs on the electrical system:

• Obtain the anti-theft radio security code.

• Switch the ignition off.

• Disconnect the battery Ground (GND) strap.

• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.

• Steps after reconnecting voltage supply => Battery.

CAUTION!
High voltage!

Make sure to disconnect battery Ground (GND) strap before performing work on parts of High intensity gas discharge (xenon) headlamps marked with yellow high voltage symbols.

=> [ Headlamp Range Control Module ]

Headlamp Range Control Module

Removing

Location: Behind glove box on instrument panel

- Remove glove box:

- Unplug connector - arrow -.





- Remove bolts - 1 - and - 2 - and detach headlamp range control module.

Installing

Installation is the reverse of removal.

Tightening Specifications