Operation CHARM: Car repair manuals for everyone.

Upper C-Pillar Trim







Upper C-Pillar Trim

Removing

CAUTION!
Note safety precautions for working on airbags. Refer to => [ Airbag System General Safety Precautions ] Airbag System General Safety Precautions and side airbags => [ Side Airbag Additional Safety Precautions ] Side Airbag Additional Safety Precautions and side curtain airbags => [ Side Curtain Additional Airbag Safety Precautions ] Side Curtain Additional Airbag Safety Precautions.

- Remove the rear bench seat. Refer to => [ Bench Seat ] Bench Seat.

- Remove side airbag. Refer to => [ Rear Seat Side Upholstery ] Rear Seat Side Upholstery

- Remove luggage compartment side trim. Refer to => [ Luggage Compartment Side Trim ] Luggage Compartment Side Trim.

- Lift spring latch - arrow A -.





- Slide belt guide - 1 - back out of bracket - arrow B -.

Screws on underside of belt guide must not be turned. If they are turned, belt guide must be replaced.

- Remove the bolt - 1 -.





- Pull upper C-pillar trim - 2 - up from body - arrow A -.

- Remove upper C-pillar trim downward - arrow B -.

Installation

Installation is reverse of removal, but note the following:

Upper C-pillar trim threaded holes must be cleaned of locking compound residue after removal. Otherwise, new screws could lock up when installed and shear off when removed again.

They can be cleaned with a thread cutter.

Replace self-locking screws.

Replace damaged spring clamps.

- When inserting upper C-pillar trim - 3 -, ensure retaining strap - 2 - engages in body cut-out - arrow - and headliner - 1 -.





- Slide in belt guide until it engages with a click.

Screws on underside of belt guide must not be turned. If they are turned, belt guide must be replaced.

- Pull door seal lip over trim edge on all door cut-outs.

- Install luggage compartment side trim. Refer to => [ Luggage Compartment Side Trim ] Luggage Compartment Side Trim.

- Install side airbag. Refer to => [ Rear Seat Side Upholstery ] Rear Seat Side Upholstery

- Install the rear bench seat. Refer to => [ Bench Seat ] Bench Seat.

Tightening Specifications





* Replace screws.