Access/Start Authorization Antenna 2 In Vehicle Interior

Access/Start Authorization System

Access/Start Authorization Antenna 2 in Vehicle Interior

Removing





- Remove center console.

- Grasp by hand beneath floor carpet - arrow - and remove securing strap - 1 -.

- Remove Interior Access/Start Authorization Antenna 2 (R139) - item 2 - from foam cushion - 3 -.

- Unplug connector.

Installing

Install in reverse order of removal, observing the following:

• The securing strap serves as an initial anchor on the assembly strap and must not be replaced when replacing interior access/start authorization antenna 2.

- Install center console.