Steering Column Electronic Systems Control Module Connector Assignment, Front Side

Steering Column Electronic Systems Control Module Connector Assignment, Front Side

• Steering column electronic systems control module (J527) is part of complete steering column switch module (SCSM) system. and receives signals from steering column switch, for example.

• Testing module is performed with the vehicle diagnosis, testing and information system (VAS 5051B).






A - Cruise Control Connector

1 - Ground (GND)

2 – Fix

3 – Distance

4 - 12V voltage supply

5 - Resume/touch Off

6 – Acceleration/deceleration

7 - Locked Off

B - Turn Signal Indicator Connector

1 - Ground (GND)

2 – Radio telephone (special-purpose vehicles)

3 – Alarm (special-purpose vehicles)

4 – Not used

5 – Headlamp flasher/lamp control

6 – Turn signal indicators

C - Harness Connector of Multi-Function Steering Wheel/Tiptronic/Heated Steering Wheel

7 - Tip-"-"

8 - Multi-function steering wheel "+" voltage supply

9 – Multi-function steering wheel/data

10 - Tip-"+"

11 – Multi-function steering wheel/dimmer

12 - Tiptronic ground (GND)

13 - Heated steering wheel "+"

14 - Heated steering wheel "-"

D - Steering Angle Sensor

1 – lamp barrier 5

2 – lamp barrier 3

3 – lamp barrier 1

4 - 12V voltage supply

5 - 5 V voltage supply

6 – lamp barrier 6

7 – lamp barrier 4

8 - lamp barrier 2

9 – Steering Angle Sensor ground

10 – lamp barrier 7

E - Horn

1 – Horn ground

2 – Horn

F - Wiper System

1 - Ground (GND)

2 – Intermittent wipe potentiometer

3 - Board computer

4 – Not used

5 – Wash

6 – Wipe