Turn Signal Bulb

Halogen Headlamps

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

• Adjust the headlamps after performing any work that could have affected their adjustment.

Turn Signal Bulb

Removing

- Switch off ignition and remove ignition key.

- Remove appropriate front wheel.

- Remove appropriate front wheel housing liner.

- Loosen locking bolt - 1 - a few turns.





- Release retainer tabs - arrows - and detach low beam housing cover from headlamp housing.

- Remove bulbs - arrows - from housing.





- Unplug connector at bulb.

Installing

Install in reverse order of removal, observing the following:

- Push socket into reflector until it engages noticeably.

- Close housing cover and secure with screw.

- Install front wheel housing liner.