Operation CHARM: Car repair manuals for everyone.

Diagram 120/13 (Tracks 155-168)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Map Controlled Engine Cooling Thermostat, Heated Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC), Camshaft Adjustment Valve 1, Camshaft Adjustment Valve 1 (exhaust), Leak Detection Pump (LDP)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F265 - Map Controlled Engine Cooling Thermostat Engine Management Systems Locations

G130 - Heated Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) Locations

G131 - Heated Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) Locations

J623 - Engine Control Module (ECM) Control Modules Overview

N205 - Camshaft Adjustment Valve 1 Engine Management Systems Locations

N318 - Camshaft Adjustment Valve 1 (exhaust) Engine Management Systems Locations

T4r - 4-Pin Connector, black, on Oxygen Sensor 1 behind Three Way Catalytic Converter

T4z - 4-Pin Connector, black, on Oxygen Sensor 2 behind Three Way Catalytic Converter

T17c - 17-Pin Connector, brown, in E-Box plenum chamber Connector Stations and Connectors Overview, in E-Box Plenum Chamber

T17d - 17-Pin Connector, blue, in E-Box plenum chamber Connector Stations and Connectors Overview, in E-Box Plenum Chamber

T60a - 60-Pin Connector, black, connector A, on Engine Control Module

T94a - 94-Pin Connector, black, connector B, on Engine Control Module

V144 - Leak Detection Pump (LDP) Locations

V183 - Variable Intake Manifold Runner Motor Engine Management Systems Locations

Z29 - Oxygen Sensor (O2S) Heater 1 (behind Three Way Catalytic Converter (TWC))

Z30 - Oxygen Sensor (O2S) Heater 2 (behind Three Way Catalytic Converter (TWC))

(D109) - Connection 7 (in engine compartment wiring harness)

(D110) - Connection 8 (in engine compartment wiring harness)

Previous Diagram 120/12 (Tracks 141-154)

Next Diagram 120/14 (Tracks 169-182)