Diagram 120/22 (Tracks 281-294)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module 2, Knock Sensor 3, Knock Sensor 4, Camshaft Position (CMP) Sensor 2, Camshaft Position (CMP) Sensor 4, Exhaust Flap Valve 2





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G163 - Camshaft Position (CMP) Sensor 2 Engine Management Systems Locations

G198 - Knock Sensor 3 Engine Management Systems Locations

G199 - Knock Sensor 4 Engine Management Systems Locations

G301 - Camshaft Position (CMP) Sensor 4 Engine Management Systems Locations

J624 - Engine Control Module 2 5.2L BSM Overviews

N322 - Exhaust Flap Valve 2 Engine Management Systems Locations

T3w - 3-Pin Connector, white, on knock sensor 3

T3x - 3-Pin Connector, blue, on knock sensor 4

T17c - 17-Pin Connector, brown, in E-Box plenum chamber Connector Stations and Connectors Overview, in E-Box Plenum Chamber

T60d - 60-Pin Connector, black, connector A, on Engine Control Module 2

T94d - 94-Pin Connector, black, connector B, on Engine Control Module 2

(D115) - Connection 13 (in engine compartment wiring harness)

(D116) - Connection 14 (in engine compartment wiring harness)

Previous Diagram 120/21 (Tracks 267-280)

Next Diagram 120/23 (Tracks 295-308)