Diagram 120/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Cylinder 1 to 4 Fuel Injectors, Ignition Coils 1 to 4 with Power Output Stage





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J623 - Engine Control Module (ECM) Control Modules Overview

N30 - Cylinder 1 Fuel Injector Engine Management Systems Locations

N31 - Cylinder 2 Fuel Injector Engine Management Systems Locations

N32 - Cylinder 3 Fuel Injector Engine Management Systems Locations

N33 - Cylinder 4 Fuel Injector Engine Management Systems Locations

N70 - Ignition Coil 1 with Power Output Stage Engine Management Systems Locations

N127 - Ignition Coil 2 with Power Output Stage Engine Management Systems Locations

N291 - Ignition Coil 3 with Power Output Stage Engine Management Systems Locations

N292 - Ignition Coil 4 with Power Output Stage Engine Management Systems Locations

P - Spark Plug Connectors

Q - Spark Plugs

T14f - 14-Pin Connector, black, in engine compartment

T60a - 60-Pin Connector, black, connector A, on Engine Control Module

(131) - Ground Connection 2 (in engine compartment wiring harness)

(221) - Ground Connection (engine ground) (in engine compartment wiring harness)

(D103) - Connection 3 (in engine compartment wiring harness)

(D104) - Plus Connection 2 (30a) (in engine compartment wiring harness)

Previous Diagram 120/5 (Tracks 43-56)

Next Diagram 120/7 (Tracks 71-84)