Diagram 120/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Camshaft Position (CMP) Sensor, Knock Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G40 - Camshaft Position (CMP) Sensor Engine Management Systems Locations

G61 - Knock Sensor (KS) 1 Engine Management Systems Locations

G66 - Knock Sensor (KS) 2 Engine Management Systems Locations

G300 - Camshaft Position (CMP) Sensor 3 Engine Management Systems Locations

J217 - Transmission Control Module (TCM) Control Modules Overview

J393 - Comfort System Central Control Module Control Modules Overview

J623 - Engine Control Module (ECM) Control Modules Overview

T3i - 3-Pin Connector, orange, on knock sensor 1

T3p - 3-Pin Connector, grey, on knock sensor 2

T10q - 10-Pin Connector, black, Connector C, on Central Control Module for Comfort System

T16 - 16-Pin Connector, black, Data Link Connector (DLC)

T16c - 16-Pin Connector, black, on Transmission Control Module (TCM) Control Modules Overview

T17a - 17-Pin Connector, black, in E-Box plenum chamber Connector Stations and Connectors Overview, in E-Box Plenum Chamber

T17b - 17-Pin Connector, green, in E-Box plenum chamber Connector Stations and Connectors Overview, in E-Box Plenum Chamber

T60a - 60-Pin Connector, black, connector A, on Engine Control Module

T94a - 94-Pin Connector, black, connector B, on Engine Control Module

(200) - Ground Connection (shielding) (in engine compartment wiring harness)

(D111) - Connection 9 (in engine compartment wiring harness)

(D141) - Connection (5V) (in wiring harness), engine pre-wiring

(D166) - K-Diagnosis Connection (in engine wiring harness)

Previous Diagram 120/7 (Tracks 71-84)

Next Diagram 120/9 (Tracks 99-112)