Scan Tool Testing and Procedures

Level Control System

VAS 5051, Connecting and Selecting Functions

Special tools, testers and auxiliary items required

• Diagnostic operation system (VAS 5051A)

• Diagnostic cable (VAS 5051/5A)

CAUTION!
• During a test drive, the test and measuring equipment must always be secured in the back seat.

• These devices may be operated only by a passenger during a test drive.

- Connect the (VAS 5051/5A) to the diagnostic connector.





- Switch on the tester - arrow -.





The tester is operational when it displays a picture of a car.

- Switch on the ignition.

• If control modules or electric/electronic components were replaced, component adaptation should generally be carried out in Guided Fault Finding.

- Touch Guided Fault Finding on the screen.

- Select one after another:

• Brand

• Model

• Model year

• Version

• Engine code

- Confirm the data entered.

• Wait until the tester has checked all control modules in the vehicle.

- Press the Go to button and select the "Function/Component Selection" function.

- Then press:

- "Chassis (Repair group 01; 40 - 49)".

- "Level control (Repair group 01; 43 - 44)".

- "01- On Board Diagnostic (OBD) capable systems".

- "34 - Level control system control module ".

- "J197 - Level control system control module functions".

or

- "Chassis (Repair group 01; 40 - 49)".

- "Level control (Repair group 01; 43 - 44)."

- "01- On Board Diagnostic (OBD) capable systems".

- "34 - Level control system control module ".

- "Electrical components".