Upper B-pillar Trim

Upper B-pillar Trim

Removing


Observe safety precautions for work on airbags.

- Remove lower A-pillar trim. Refer to => [ Lower A-Pillar Trim ] Lower A-Pillar Trim.

- Remove sill panel trim. Refer to => [ Sill Panel Strip ] Sill Panel Strip

- Remove lower B-pillar trim. Refer to => [ Lower B-pillar Trim ] Lower B-pillar Trim.

- Remove bolt - 1 - on three-point seat belt lower anchorage point - 2 -.





- Remove the bolts - 1 -.





- Remove lower B-pillar trim from B-pillar until guide pins - 2 - are freed up.

- Then remove trim downward.

Installation





Installation is reverse of removal, but note the following:

- Slide belt height adjuster on B-pillar all the way down.

- Position B-pillar trim in installation position.

• The B-pillar trim adjustment handle must engage on belt height adjuster release lever - 2 - and pins - 1 -.

- Slide B-pillar trim upward into headliner cut-out.





• Both guide hooks must engage in holes on roof frame.

• Function test after installing the trim:

• The height adjuster must audibly engage in each of the 5 possible positions.

• The release button must spring back by itself after pressing.

- Slide lower B-pillar trim guide pins - 2 - into holes on B-pillar and tighten trim bolts - 1 -.





- Tighten lower three-point seat belt mounting point.

- Install lower B-pillar trim. Refer to => [ Lower B-pillar Trim ] Lower B-pillar Trim.

- Install sill panel trim. Refer to => [ Sill Panel Strip ] Sill Panel Strip.

- Install lower A-pillar trim. Refer to => [ Lower A-Pillar Trim ] Lower A-Pillar Trim.

Tightening Specifications






* Insert with locking compound; locking compound.