Backrest Cover

Backrest Cover

Special tools, testers and auxiliary items required

• Pry Lever (80 - 200)










1 Right Backrest Cover

• Removing and Installing, refer to => [ Backrest Cover ]

2 Left Backrest Cover

• Removing and Installing, refer to => [ Backrest Cover ]

3 Retaining Clip

4 Bolt

• 2.5 Nm

• Insert with locking compound

5 Outer Part of Belt Guide

• Removing and Installing, refer to => [ Outer Part of Belt Guide, Removing and Installing ]

6 Inner Part of Belt Guide

• With release lever

• The version without the backrest release is shown in the illustration

• To remove, remove backrest cover. Refer to => [ Backrest Cover and Upholstery ] Backrest Cover and Upholstery

• Disassembling. Refer to => [ Rotate inner part of belt guide and release
retaining tabs. ] Backrest Lock Actuating Link

7 Backrest Frame

Backrest Cover





- Affix backrest panel all around trim - 1 - using adhesive tape - 2 -.

- Using (80 - 200), pry off upper backrest cover at inner side, starting from backrest panel.

- Disengage clip at front corner of backrest panel extremely carefully.

Outer Part of Belt Guide, Removing and Installing





- Carefully guide (80 - 200) between backrest cover and outer part of belt guide.

- Carefully press to disengage outer part of belt guide from inner part.