Center Armrest Internal Upholstery

Center Armrest Internal Upholstery

Removing





- Fold center armrest up.

- Open pass-through - 1 -.

- Remove bolts - arrows -.

- Remove pass-through.

- Release clips - A - and - B - on rear side of hinge - 1 - and pass-through - 3 -.





- Remove internal upholstery - 2 - in - direction of arrow -.

Installation





Installation is reverse of removal, but note the following:

- Position internal upholstery - 2 - at top of pass-through.

- Press internal upholstery on bottom side onto clips - 3 - on hinge - 1 - and pass-through - 4 -.

- If the internal upholstery cannot be pressed on, carefully press in clips - 3 - with a screwdriver until upholstery engages in retainer.

Tightening Specifications