Temperature Sensor (Gauge)

Engine Coolant Temperature Sensor Multi-Pin Connector Assignments (CCTA Or CBFA Engine)







Engine Coolant Temperature (ECT) Sensor G62
The coolant temperature sensor G62 is located on the water pumps/thermostat housing at the front on the cylinder head.
- Carefully release and remove 2-pin electrical connector - 1 -.

NOTE: Ignore - item 2 - and - arrows -.







Terminal assignment of the 2-pin harness connector at Engine Coolant Temperature (ECT) Sensor G62

1. Wire connection from Engine Coolant Temperature (ECT) Sensor G62 to engine control module
2. Sensor ground (GND)







Engine Coolant Temperature (ECT) Sensor (on Radiator) G83
The Engine Coolant Temperature (ECT) Sensor (on Radiator) G83 sits on the bottom left of the radiator.
- Carefully release and remove 2-pin electrical connector - 2 -.

NOTE: Disregard item - 1 -.







2-pin connector assignment on Engine Coolant Temperature (ECT) Sensor (on Radiator) G83

1. Wiring connection from Engine Coolant Temperature (ECT) Sensor (on Radiator) G83 to engine control module
2. Sensor ground (GND)