Diagram 20/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Fuses, Towing Recognition Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J345 - Towing Recognition Control Module Overview Of Control Modules

SA6 - Fuse 6 (on fuse panel A) Overview Of Fuses

SB29 - Fuse 29 (on fuse panel B) Overview Of Fuses

SB53 - Fuse 53 (on fuse panel B) Overview Of Fuses

SC44 - Fuse 44 (on fuse panel C) Overview Of Fuses

SC45 - Fuse 45 (on fuse panel C) Overview Of Fuses

SD2 - Fuse 2 (on fuse panel D) Overview Of Fuses

T12h - 12-Pin Connector, red (Connector B)

T40 - 40-Pin Connector, black, on electronics box engine compartment (Connector J)

(62) - Ground Connection (on right C-pillar) Overview Of Ground Connections in Rear Part Of Vehicle (3-door Models)

(370) - Ground Connection 5 (in main wiring harness)

(B298) - Plus Connection 2 (30) (in main wiring harness)

(B300) - Plus Connection 4 (30) (in main wiring harness)

* - Only models with battery in engine compartment

** - Only models with battery in luggage compartment

*** - Applicable from May 2007

**** - Not applicable from May 2007

***** - Fuse was increased from 15 A to 20 A, applicable from November 2006

# - Only models with electronics box Low => Component Locations

## - Only models with electronics box High => Component Locations

Next Diagram 20/3 (Tracks 15-28)