Diagram 50/13 (Tracks 155-168)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Oxygen Sensors (O2S) Behind Three Way Catalytic Converter (TWC)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J623 - Engine Control Module (ECM) Control Modules in Front Part Of Vehicle

SB21 - Fuse 21 (on fuse panel B) Overview Of Fuses

T4b - 4-Pin Connector, black, on oxygen sensor (O2S) behind three way catalytic converter (TWC)

T4ao - 4-Pin Connector, brown, on center heated oxygen sensor (HO2S)

T40 - 40-Pin Connector, black, on electronics box engine compartment (Connector J)

T94 - 94-Pin Connector, black (Connector B)

G130 - Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) Locations Oxygen Sensor After Converter -G130- / Heater For Oxygen Sensor 1 After Converter -Z29-

G287 - Oxygen Sensor (O2S) 3 Behind Three Way Catalytic Converter (TWC)

Z29 - Oxygen Sensor (O2S) Heater 1 (behind Three Way Catalytic Converter (TWC) Locations Oxygen Sensor After Converter -G130- / Heater For Oxygen Sensor 1 After Converter -Z29-

Z64 - Oxygen Sensor (O2S) Heater 3 (behind Three Way Catalytic Converter (TWC)

(D113) - Connection 11 (in engine compartment wiring harness)

Previous Diagram 50/12 (Tracks 141-154)

Next Diagram 50/14 (Tracks 169-182)