Diagram 2/20 (Tracks 253-266)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Back-up lamp switch, Left front brake pad wear sensor, Rain/light recognition sensor, Vehicle electrical system control module, Left washer nozzle heater, Right washer nozzle heater





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F4 - Back-up lamp switch Direct Shift Gearbox 02E (DSG)

G34 - Left front brake pad wear sensor

G397 - Rain/light recognition sensor

J519 - Vehicle electrical system control module Control Modules in Interior Of Vehicle

T8h - 8-pin connector

Z20 - Left washer nozzle heater

Z21 - Right washer nozzle heater

(369) - Ground connection 4 (in main wiring harness)

(372) - Ground connection 7 (in main wiring harness)

(638) - Ground connection on right A-pillar Overview Of Ground Connections in Interior Of Vehicle

(B281) - Positive connection 5 (15a) (in main wiring harness)

(B549) - LIN bus connection 2 (in main wiring harness)

* - Only for vehicles with automatic headlamp assist

*2 - Only for vehicles with a manual transmission

*3 - Only for vehicles with spray nozzle heater

Previous Diagram 2/19 (Tracks 239-252)

Next Diagram 2/21 (Tracks 267-280)