Ribbed Belt Pulley Without Freewheel

Ribbed Belt Pulley without Freewheel

Special tools, testers and auxiliary items required

• Socket (3310)

• 8 mm Hex Socket or TORX T50

Removal






- Remove the generator.

- If present, press the protective cap off the generator pulley.

- Counter-hold nut using (3310) and rotate generator shaft clockwise to loosen it.

- Remove ribbed belt pulley.

Installation

Install in reverse order of removal. Note the following:

- Turn the generator shaft counterclockwise to tighten.

- Clip protective cap onto generator pulley.

Tightening Specifications