Service

Service

Fitting Location (Criteria 8P and 8J)





1. Carefully pull off engine cover panel at positions 1, 2, 3, and then 4 one after the other (Figure 1).

Tip: It is important to keep to this sequence; otherwise, the engine cover panel can be damaged.





10 - Intake Manifold Flap Actuator (Intake Manifold Flap Motor -V157- with Intake Manifold Flap Potentiometer - G336-).

Fitting Location (Criteria 8E and 8H)





1. Carefully remove the engine cover panel off the retaining pins.

Tip: Do not jerk the cover panel away, and do not try to pull on one side only.





10 - Intake Manifold Flap Actuator (Intake Manifold Flap Motor -V157- with Intake Manifold Flap Potentiometer - G336-).

Checking and replacing Intake Manifold Flap Actuator (All Criteria)





1. Check part number of Intake Manifold Flap Actuator installed.

^ If part number of the actuator is 06F 133 482 or 06F 133 482 E, no further work is required.

^ If the actuator has a different part number, replace Intake Manifold Flap Actuator (Intake Manifold Flap Motor -V157- with Intake Manifold Flap Potentiometer -G336-) with part 06F 133482 E.

Workshop Manual >> Injection and ignition system >> Rep. Gr 24 >> Injection system >> "Overview of fitting locations" and "High-pressure pump - exploded view"








Warranty





Required Parts and Tools
^ Properly destroy and dispose of removed parts in accordance with all state and local requirements, unless otherwise indicated and/or requested through SAGA.

^ If you have exhausted your allocated parts and you require additional parts for vehicles affected by this Update but have exceeded your Upper Order Limit, please submit your requests for additional parts via email to upperorderlimits@audi.com. Be sure to include the affected VINs with your order. Prior to submitting your request, ensure that each vehicle has the 24T3 code open in ElsaWeb. Your order will be reviewed and processed accordingly.

Additional Information

All parts and service references provided in this Update are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information.