Secondary Air Injection Left Combination Valve

Secondary Air Injection Left Combination Valve

Removing

- Remove the throttle valve control module (J338).

- Remove the hose - 1 - from the secondary air injection (AIR) combination valve.





- Disconnect vacuum hose - 2 -.

- Remove the bolts - arrows - and lay the tube for the secondary air injection (AIR) to the side.

- Remove the bolts - 3 - and remove the left secondary air injection (AIR) combination valve.

• To provide a better illustration, component location is shown from behind with engine removed.

Installing

Installation is in reverse order of removal, note the following:

• Replace the seals

- Install throttle valve control module (J338).

Tightening Specifications