Connectors, Disconnecting

Connectors, Disconnecting

NOTE: The mechanic must electrostatically discharge him/herself before disconnecting ignition and ground (GND) wires (briefly touch closing wedge for door or body).







1 - Front seat
2 - Buckle interrogation connector (black)
3 - Seat heating connector (green)
4 - Power supply connector (red)
5 - Airbag connector (yellow)
6 - Connector point cover

Removing
- Tilt front seat - 1 - back.
- Remove connection point cover - 6 - upward.
- Press tab on airbag connector - 5 - inboard side and remove airbag connector - 5 -.
- Connect airbag adapter.
- Press tab on power supply connector - 4 - inboard side and remove power supply connector - 4 -.
- Press tab on seat heating connector - 3 - inboard side and remove seat heating connector - 3 -.
- For vehicles with buckle interrogation: Press in tab on buckle interrogation connector - 2 - inboard side and remove buckle interrogation connector - 2 -.