Head Restraint Guides, Removing and Installing

Head Restraint Guides, Removing and Installing







Removing

NOTE: For improved clarity, head restraint guide - 1 - is shown removed.

- Insert padding needle or screwdriver - 3 - with maximum width of 2 mm into hole - 4 - (hole - 4 - is opposite retaining clip for head restraint guide).
- Pry screwdriver - 3 - in direction of arrow - A -, press retainer tab - 2 - in direction of arrow - B -, and pull out head restraint guide - 1 -.

Installing

- Installation is reverse of removal.