Instrument Cluster

Instrument Cluster

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Special tools, testers and auxiliary items required

• Special Hook (3370)

Removing

• Do not disassemble instrument cluster.

- If the instrument cluster is replaced with Instrument Cluster Control Module (J285), select "Replace" function of (J285) Vehicle diagnosis, testing and information system VAS 5051 in "Guided Functions".

- Switch off ignition and remove ignition key.

- Lower steering wheel as far as possible to rear, making use of the full range of the steering column adjuster.

• For the sake of illustration, the work steps shown in the following illustrations are depicted with steering wheel removed.

- Remove the lower cover on the instrument panel toward the rear - arrows - using the Special Hook (3370).





- Disengage upper cover at instrument cluster.

- Remove screws - arrows -.





- Carefully loosen the instrument panel and remove it toward the rear.





- Release electrical connector retainer - arrow - and remove connector.





Installing

Install in reverse order.