Fuse Panel

Fuse Panel

Removing

- Disconnect battery. Audi A4 & S4=> [ Battery, Engine Compartment, Disconnecting and Connecting ] Battery, Engine Compartment, Disconnecting and Connecting. Audi RS4 => [ Battery, Luggage Compartment, Disconnecting and Connecting ] Battery, Luggage Compartment, Disconnecting and Connecting.

- Where applicable, remove driver's storage compartment.

- Remove screws - 1 - for fuse panel - 2 -.





- Release upper an d lower retaining clips and detach fuse panel from central tube for instrument panel.

- Disengage wiring harness at central tube for instrument panel and set aside.

- Cut open cable tie - 1 -.





- Release cover for fuse panel - arrows -.

- Remove fuses at fuse panel.

- Remove retaining strip for connectors - arrows - and take connectors out of fuse panel.





- Unclip socket - 1 -.

• Refer to the applicable wiring diagram for exact identification of connections on fuse box => Wiring Diagrams.





Installing

Install in reverse order of removal, noting the following:

- Install driver's storage compartment.

- Reconnect battery. Required steps Audi A4 & S4 => Battery, Engine Compartment, Disconnecting and Connecting. Required steps Audi RS4 => Battery, Luggage Compartment, Disconnecting and Connecting.

Tightening Specifications