Controls, Housing
Electrical/electronic components and installed locations - 01J, Continuously Variable Transmission (CVT)
1 - Transmission Control Module (TCM) J217
2 - Hydraulic control module
3 - Shift mechanism cover
4 - Tiptronic Switch F189
5 - Shift lock solenoid N110
6 - Data Link Connector (DLC)
7 - Cruise Control Switch E45
8 - Park/Neutral Position (PNP) Relay J226 (up to 10.04) or Starting Interlock Relay J207 (as of 11.04)
9 - Power supply relay terminal 87/ Starter Interlock Alarm System Relay J60
10 - Transmission Range (TR) Display Y6
11 - Kick Down Switch F8
12 - Brake Light Switch F
Transmission Control Module (TCM) J217
^ Location: Transmission Control Module (TCM) J217 is on the back end of transmission, secured directly to hydraulic control module.
The following components are integrated in the control module:
A - Transmission Output Speed (RPM) Sensor G195 and Transmission Output Speed (RPM) Sensor 2 G196
B - Transmission Fluid Temperature Sensor G93
C - Multi-Function Transmission Range (TR) Switch F125
D - Transmission Input Speed (RPM) Sensor G182
E - Automatic Transmission Hydraulic Pressure Sensor 1 G193
F - Automatic Transmission Hydraulic Pressure Sensor 2 G194
Hydraulic control module
^ Location: Hydraulic control module is bolted to back end of transmission. Transmission Control Module (TCM) J217 is fastened directly to hydraulic control module.
A - Harness connector for Automatic Transmission Pressure Regulating Valve 1 N215
B - Harness connector for Automatic Transmission Pressure Regulating Valve 2 N216
C - Harness connector for Solenoid Valve 1 N88
Following valves are integrated into hydraulic control module (not depicted here).
^ Automatic Transmission Pressure Regulating Valve 1 N215 (clutch solenoid valve)
^ Automatic Transmission Pressure Regulating Valve 2 N216 (solenoid valve gear)
^ Solenoid Valve 1 N88 (clutch cooling/safety shut-off)
^ Clutch cooling valve
^ Minimum pressure valve
^ Pressure relief valve
^ Clutch control valve
^ Pressure control valve
Note:
^ Valves are monitored via On Board Diagnostic (OBD).
^ Description and functions of individual valves 951103 Continuously Variable Automatic Transmission Multitronic 01J.
Shift lock solenoid N110
^ Location: Shift Lock Solenoid N110 is located in shift mechanism - arrow -.
Data Link Connector (DLC)
^ Location: Diagnostic connection is located beneath knee bolster on left of steering wheel.
Cruise Control Switch E45
^ Location: Cruise control switch is located on steering column switch.
Transmission Range (TR) Display Y6
^ Location: Integrated in instrument cluster.
Note:
^ Transmission Range (TR) Display Y6 can only be replaced as a set with the instrument cluster.
Power supply relay terminal 87 / Starter Interlock Alarm System Relay J60 and Park/Neutral Position (PNP) Relay J226 (up to 10.04) or Starting Interlock Relay J207 (as of 11.04)
^ Location: On relay carrier in E-box, plenum chamber.
Voltage is supplied differently via terminal 87:
1 - Starter Interlock Alarm System Relay J60 - only in vehicles with 2.4 L gasoline engine
3 - Motronic Engine Control Module (ECM) Power Supply Relay J271 - in all other vehicles with gasoline engine
3 - Power Supply Relay (terminal 30, B+) J317 - in vehicles with Diesel engine
4 - Park/Neutral Position (PNP) Relay J226 (up to 10.04) or Starting Interlock Relay J207 (as of 11.04)
Note:
^ In vehicles as of 11.04, activation of reverse driving lights occurs via CAN-Bus.
Brake Light Switch F
^ Location: Brake light switch - arrow - is located in brake pedal assembly.
Note:
^ Switch is only to be installed once so as to ensure a firm fit.
Kick Down Switch F8
^ Location: In accelerator pedal module - arrow -.
Note:
^ In vehicles with gasoline engine, Kick Down Switch F8 adopts the functions of Throttle Position (TP) Sensor G79 and Accelerator Pedal Position Sensor 2 G185.