Switches

Switches

CAUTION!
Before beginning repairs on the electrical system:

• Obtain the anti-theft radio security code.

• Switch the ignition off.

• Disconnect the battery Ground (GND) strap.

• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.

• Steps after reconnecting voltage supply => Battery.

Convertible Top Switch

Removing

- Pull up parking brake lever.

- Unclip cover - 2 - below the parking brake lever at mounting springs - 1 -.





- Grasp opening below parking brake lever and from bottom, press out Convertible Top Operation Switch/navigation from center console - arrows -.





- Disconnect electrical harness connectors -3 to 6-.





- Carefully release catches - arrows - using a small screwdriver.

- Remove Navigation switch - 1 - from mounting frame - 2 -.

Installing

Installation is the reverse of removal.