Input Shaft With 6 Lining Discs Assembly Overview

Input Shaft with 6 Lining Discs Assembly Overview - 01J, Continuously Variable Transmission (CVT)

CAUTION!
Note the difference between input shafts with 6 and 7 lining discs.





1 - Input shaft seal

^ Replace

2 - Input shaft cover circlip

^ Replace with same thickness

3 - Input shaft cover

^ After removing the cover, the input shaft cover bearing "A" (transmission input shaft ball bearing) must be replaced

4 - Piston

^ Check for wear

5 - Pressure plate

^ Check for wear

6 - Corrugated spring washer
7 - Upper adjustment disc

^ Determine thickness
^ Replace

8 - Lining disc

^ Quantity: 6
^ Replace

9 - Outer disc

^ Quantity: 5
^ Replace

10 - Lower adjustment disc

^ Determine thickness
^ Replace

11 - Input shaft cylinder

^ Check for wear

12 - O-Ring

^ Replace

13 - Oil pipe

^ Check for wear