Connectors, Disconnecting

Connectors, Disconnecting





1 Connector Point Cover

Removing

- Loosen seat mounting bolts. Refer to => [ Seat ] Front RS Sport Seat.

- Tip front seat - 2 - back.

- Remove coupling station cover - 1 - upward.

- Press in tab on connector for voltage supply - 5 - on tunnel side and disconnect connector for voltage supply.

- Press in tab on connector for heated seat - 4 - on tunnel side and disconnect connector for heated seat.

For vehicles with seatbelt fasten sensor:

- Press in tab on connector for seatbelt fasten sensor - 3 - on tunnel side and disconnect connector for seatbelt fasten sensor.

Installing

To install, perform the steps used in removal in reverse order.

2 Front Seat

3 Belt Buckle Sensor Connector (Black)

• Depending on version

4 Seat Heating Connector (Green)

5 Current Supply Connector (Red)

6 Connector with Terminal Resistance for Side Airbag

• The terminal resistance is a component of the wiring harness.