Door Safety Light and Entry Light, Removing and Installing

Door Safety Light And Entry Light, Removing And Installing

NOTE:
- Door safety light or entry light must be removed to replace bulb.
- Bulb for door safety light: 12 V, 5 W
- Bulb for entry light: 12 V, 5 W

Removing







- Using a flat screwdriver, press in retaining tab -1- and pry out door safety light or entry light -2-.
- Unplug connector -3-.







- If present, carefully pry off cover on door safety light -arrow-.
- Remove bulb from socket on back side of door safety light or entry light.

Installing
Installation is reverse of removal, paying attention to the following:
- If present, install cover on door safety light.
- Plug in connector.
- Insert door safety light or entry light into opening and engage on opposite side.