Fuel Filler Flap, Removing and Installing

Fuel Filler Flap, Removing And Installing







1 - Screw
- 1.5 Nm

2 - Fuel filler flap
3 - Circlip
- Remove before removing filler neck cup.

4 - Filler neck cup

- Removing:
- Remove securing clip.
- Raise cup out of opening slightly.
- Remove drain hose from lower guide piece and completely remove from opening with cup.

- Installing:
- Coat cup with lubricant (e.g. soap solution).
- Slide drain hose into body opening.
- Press cup completely into opening.
- Insert circlip.
- Insert drain hose into lower guide piece.

- Panel gap dimensions.







Insert filler neck cup drain hose into guide piece.

- Remove rear wheel housing liner bolts in guide piece area.
- Pull wheel housing liner back slightly and insert drain hose - 2 - for cup - 1 - in bumper guide piece eyelet - 3 -.