Glove Compartment Cover Brake

Glove Compartment Cover Brake

Special tools, testers and auxiliary items required

• Special hook (3370)





• There are 2 versions of the glove compartment cover brake. Both versions are described in the following. Determine which version the vehicle has and performed the corresponding activities.

Version 1

Removing

- Remove glove compartment. Refer to => [ Storage Compartments and Covers ] Service and Repair.

- Press pin - 1 - out in direction of arrow at connection between brake for glove compartment cover - 2 - and glove compartment cover - 3 -.





- Loosen green connector.

- Rotate brake for glove compartment cover - 1 - approx. 90° in cut-out - 2 - and remove brake for glove compartment cover.





Installing

To install, perform the steps used in removal in reverse order.

Version 2

Removing

- Open the glove compartment.

- Pull off right cover on instrument panel - arrow - using special tool 3370.





- Disconnect electrical connector - 2 -.





- Remove the joint pin 1- 1 -.

- Disengage the brake for glove compartment cover - 3 - in a clockwise direction and remove it.

• Depicted in illustration with glove compartment removed.

Installing

To install, perform the steps used in removal in reverse order.