Backrest Covers, Removing and Installing

Backrest Covers, Removing and Installing

Special tools, testers and auxiliary items required







- Pry lever 80 - 200







1 - Right backrest cover
- Removing and installing

2 - Left backrest cover
- Removing and installing

3 - Retaining clamp
4 - Screw (2.5 Nm)
5 - Belt guide, outer part
- Removing and installing

6 - Belt guide, inner part
- To remove, remove backrest cover

7 - Backrest frame







Backrest cover, removing and installing

- Attach backrest panel all around trim - 1 - using adhesive tape - 2 -.
- Using pry lever 80-200, pry off upper backrest cover at inner side, starting from backrest panel.
- Disengage clip at front corner of backrest panel extremely carefully.







Outer part of belt guide, removing and installing

- Carefully guide pry lever 80-200 between backrest cover and outer part of belt guide.
- Carefully press to disengage outer part of belt guide from inner part of belt guide.