Connector Assignments

iPod Baseplate

NOTE: Unlisted connector terminals are not assigned.







Black 12-pin multi-pin harness connector (T12a)
1 - Data out to Radio R / Operating Electronics, Navigation Control Module J402 / Radio/Navigation Display Control Module J503
2 - CLK out to Radio R / Operating Electronics, Navigation Control Module J402 / Radio/Navigation Display Control Module J503
3 - Terminal 31
4 - Data in from Radio R / Operating Electronics, Navigation Control Module J402 / Radio/Navigation Display Control Module J503
6 - Permanent positive from Radio R / Operating Electronics, Navigation Control Module J402 / Radio/Navigation Display Control Module J503
7 - Right signal to Radio R / Operating Electronics, Navigation Control Module J402 / Radio/Navigation Display Control Module J503
8 - Positive switched from Radio R / Operating Electronics, Navigation Control Module J402 / Radio/Navigation Display Control Module J503
9 - Signal ground from Radio R / Operating Electronics, Navigation Control Module J402 / Radio/Navigation Display Control Module J503
10 - Left signal to Radio R / Operating Electronics, Navigation Control Module J402 / Radio/Navigation Display Control Module J503
11 - TOC Check Control (not used)
12 - Terminal 58 (not used).