Modular Wiring Routing, From August 2005, Assembly Overview

Standard Front Seat, from November 2004

• From August 2005, the conventional wiring harness routing to the connector station under the front seat. Refer to => [ Connectors, Disconnecting ] has been replaced with modular wiring routing. Refer to => [ Modular Wiring Routing, from August 2005, Assembly Overview ].

• The modular wiring routing has not been implemented for all countries.

Modular Wiring Routing, from August 2005, Assembly Overview

• Modular wiring routing has not been implemented on vehicles for all countries.

• Check version of front seat and of vehicle and perform repairs accordingly.





1 Front Seat

2 Cable Clip

• for securing corrugated tube to seat pan

3 Bolt

• 3.5 Nm

4 Cable Bracket

• Note location. Refer to => [ Modular Wiring Routing with Corrugated Tube on Front Seat ]

5 Corrugated tube

• Lower shell

• Note location. Refer to => [ Modular Wiring Routing with Corrugated Tube on Front Seat ]

6 Corrugated tube

• Upper shell

• Note location. Refer to => [ Modular Wiring Routing with Corrugated Tube on Front Seat ]

7 Wiring Harness

• Observe notes for routing wiring harness in corrugated tube. Refer to => [ Modular Wiring Routing with Corrugated Tube on Front Seat ]