Connector Assignments

CD Changer

NOTE: Unlisted connector terminals are not assigned.







Black 12-pin multi-pin harness connector
1 - CD data out to Radio R / Navigation System with CD Drive Control Module J401 / Radio/Navigation Display Control Module J503
2 - CD CLK out to Radio R / Navigation System with CD Drive Control Module J401 / Radio/Navigation Display Control Module J503
3 - Ground from Radio R /terminal 31 (with RNS-E/radio generation II+)
4 - CD data in from Radio R / Navigation System with CD Drive Control Module J401 / Radio/Navigation Display Control Module J503
6 - Permanent positive from Radio R / Navigation System with CD Drive Control Module J401 / Radio/Navigation Display Control Module J503
7 - Right signal to Radio R / Navigation System with CD Drive Control Module J401 / Radio/Navigation Display Control Module J503
8 - Positive switched from Radio R / Navigation System with CD Drive Control Module J401 / Radio/Navigation Display Control Module J503
9 - Signal ground from Radio R / Navigation System with CD Drive Control Module J401 / Radio/Navigation Display Control Module J503
10 - Left signal to Radio R / Navigation System with CD Drive Control Module J401 / Radio/Navigation Display Control Module J503