Navigation System With CD Drive Control Module, Connectors
Navigation System With CD Drive Control Module, Connectors
1 - 32-pin multi-pin connector, not used
2 - Radio, Telephone, Navigation System Antenna R52 GPS connection (blue) (Ter/Sat/GPS/GSM)
3 - Connection block with four multi-pin connectors and a fuse for unit
4 - IF connection (white) to Antenna Selection Control Module J515 / Left Antenna Module R108
5 - HF connection (white) to Antenna Selection Control Module J515 / Left Antenna Module R108
NOTE: Unlisted connector terminals are not assigned.
1 - 32-pin multi-pin connector
Connector not used
13 - Right audio input
15 - Video input sync.
16 - Green video input
27 - Screen ground
28 - Audio ground
29 - Left video input
30 - Video ground
31 - Blue video input
32 - Red video input
A - Brown 8-pin multi-pin connector (T8q)
2 - Right front speaker (+) (not with BOSE)
3 - Left front speaker (+) (not with BOSE)
6 - Right front speaker (-) (not with BOSE)
7 - Left front speaker (-) (not with BOSE)
B - Blue 12-pin multi-pin connector (T12n)
2 - Signal ground from CD Changer R41 / Satellite Radio R146
3 - Speed signal (not used)
4 - Permanent positive to CD Changer R41
5 - L-diagnostic
6 - CD data out to CD Changer R41
7 - BOSE coding to ground (only with BOSE)
8 - Left signal from CD Changer R41 / Satellite Radio R146
9 - Right signal from CD Changer R41 / Satellite Radio R146
10 - Positive switched to CD Changer R41
11 - CD data in from CD Changer R41
12 - CD CLK from CD Changer R41
C - Green 12-pin multi-pin connector (T12m)
1 - Microphone input (-) (not used)
2 - Signal from Back-Up Light Switch F4 (not used)
3 - Left front signal to Amplifier R12 (only with BOSE)
4 - Microphone output (-) (not used)
5 - Left rear signal to Amplifier R12
6 - NF (-) from Telephone Transceiver R36
7 - Microphone input (+) (not used)
8 - Signal ground to Radio R12
9 - Right front signal to Amplifier R12 (only with BOSE)
10 - Microphone output (+) (not used)
11 - Right rear signal to Amplifier R12
12 - NF (+) from Telephone Transceiver R36
D - Black 8-pin multi-pin connector D (T16j)
9 - CAN-Bus High (Infotainment)
10 - CAN-Bus Low (Infotainment)
11 - NF mute, not used 12-Terminal 31
13 - Positive switched to Amplifier R12
14 - Anti-theft warning system ground from Comfort System Central Control Module J393
15 - Terminal 30
16 - Permanent positive (not used)