Rear With Automatic Leveling Control

Vehicle level sensor in vehicles with automatic headlight vertical aim control

Note:
^ General information
^ As a replacement part, vehicle level sensor is only available together with coupling rod and lower retaining plate. To remove it completely, subframe must be removed.
^ Replacing with subframe installed.
^ Headlamp Range Control Module J431





1 - Combi-bolt

^ Always replace
^ Tighten to 85 Nm plus an additional 90 degrees turn

2 - Left Rear Level Control System Sensor G76 or G77 Right Rear Level Control System Sensor G77

^ Complete with components
^ Lever - arrow - must face toward center of vehicle
^ Replace in vehicle
^ After replacing, perform headlight basic setting

3 - Collar bolt, 10 Nm
4 - Trapezoidal control arm