Upper B-Pillar Trim
Upper B-Pillar Trim
CAUTION!
Note safety precautions for working on airbags. Refer to => [ Airbag System Safety Precautions ] Technician Safety Information and side curtain airbags => [ Side Curtain Airbag Safety Precautions ] Side Curtain Airbag Safety Precautions.
1 B pillar Trim
• Removal:
- Remove outer seatbelt anchor. Refer to => [ Seat Belt Anchor ] Service and Repair.
- Remove upper A-pillar trim. Refer to => [ Upper A-Pillar Trim ] Upper A-Pillar Trim.
- Remove upper D-pillar trim. Refer to => [ D-Pillar Trim ] D-Pillar Trim.
- Remove B-pillar trim - 1 - from door rubber.
- Unclip lower two clips - 2 - at trim.
- Unclip upper two retaining tabs - 5 - at trim - 1 -.
- Remove trim - 1 - vertically downward.
- Remove lower belt on seat at outer belt buckle anchoring point. Refer to => [ Seat Belt Anchor ] Service and Repair.
- Thread belt - 3 - out of belt height adjuster - 4 -.
• Installing:
CAUTION!
Always follow installation sequence for B-pillar trim.
• Button - 6 - must not be pressed during installation.
- Thread belt - 3 - into belt height adjuster - 4 -.
- Install belt height adjuster - 4 -. Refer to => [ Installing Upper B Pillar Trim In Belt Height Adjuster ].
- Clip B-pillar trim in at upper edge. Ensure that the two tabs - 5 - and two retainers - 7 - engage correctly (gap width must fit).
- Clip clips - 2 - to lower edge of upper B-pillar trim - 1 -.
CAUTION!
Ensure trim is held securely.
• Function test after installing trim:
• Belt height adjuster must audibly engage into all five possible positions (even top position).
• Button must return by itself to upper position after being actuated.
2 Clamps (Qty. 2)
3 Belt Webbing
4 Seat Belt Height Adjuster
5 Tabs (Qty. 2)
6 Height Adjustment Button
7 Tabs (Qty. 2)
Installing Upper B Pillar Trim In Belt Height Adjuster
- Guide slide with button - 4 - (without pressing) beginning at the top and working downward to release lever - 1 - of height adjuster while at the same time guiding pin - 2 - into mounting - 3 -.