Exterior Rearview Mirror Housing

Exterior Rearview Mirror Housing





1 - Mirror housing

• Removing:

• Remove bolts - 4 - from cover trim - 3 - and remove them downward.

• Release housing from locking tabs on mirror adjusting unit and remove it upward.

• Installing

• Position mirror housing onto mirror adjusting unit - 2 - from above.

• While doing so, locking tabs - arrows - in mirror adjusting unit must engage above and below => [ Lower mirror locking tab ].

2 - Mirror adjusting unit

3 - Lower trim strip.

4 - Combination bolts

• 1 Nm

Lower mirror locking tab





- When installing, locking tab (- arrow A -) of mirror adjusting unit - 2 - must be inserted into mirror housing catches - 1 - in - direction of arrow -.