Hydraulic Unit and Brake Line Overview. Bosch 8.0

Hydraulic Unit and Brake Line Overview. Bosch 8.0





1 - Brake master cylinder and brake booster

2 - Brake line

• Brake master cylinder/primary piston circuit to hydraulic unit.

3 - Brake line

• Brake master cylinder/secondary piston circuit to hydraulic unit.

4 - Brake line

• Hydraulic unit to right front brake caliper.

5 - Brake line

• Hydraulic unit to left rear brake caliper.

6 - Brake line

• Hydraulic unit to right rear brake caliper.

7 - Brake line

• Hydraulic unit to left front brake caliper.

8 - Antilock Brake System (ABS) hydraulic unit (N55) with ABS control module ( J104)

• With integrated brake pressure sensor.

• Removing and installing, refer to => [ Hydraulic Control Unit, Bosch 5.7 ] Hydraulic Control Unit, Bosch 5.7.

9 - Spacer (2 x)

10 - Longitudinal member (body)

11 - Bolt, 10 Nm

12 - Electronic Stabilization Program (ESP) bracket

13 - Bolt with bonded rubber bushing, tightening specification: 10 Nm

• Cannot be removed from component.

14 - Nut, 8 Nm

15 - Washer