Fog Lamps

Fog Lamps

CAUTION!
Before beginning repairs on the electrical system:

• Obtain the anti-theft radio security code.

• Switch the ignition off.

• Disconnect the battery Ground (GND) strap.

• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.

• Steps after reconnecting voltage supply => Battery.

=> [ Fog Lamps ]

=> [ Fog Lamp, Replacing Bulb ]

Fog Lamps

Removing

- Switch ignition off and remove ignition key.

- Turn light switch into - 0 - position.

- Disengage catches - 1 - to - 4 - using a screwdriver - arrow - and pull off air inlet grid in lower part of bumper.





- Remove bolts - arrows -.





- Remove headlamp insert.

- Unplug connector.

Installing

Installation is reverse of removal, paying attention to the following:

- Adjusting fog lamps => [ Fog Lamp, Adjusting ] Fog Lamps.

Tightening Specifications





Fog Lamp, Replacing Bulb

Removing

- Remove fog lamp => [ Fog Lamps ].

- Unplug connector - 1 - at bulb.





- Rotate light bulb - 2 - counterclockwise - arrow - and remove it from fog lamp housing.

Installing

Installation is reverse of removal, paying attention to the following:

- Do not touch glass portion with bare hands.

- Secure light bulb by turning clockwise.

- Adjusting fog lamps => [ Fog Lamp, Adjusting ] Fog Lamps.