6 SPD. M/T 02X AWD

Conventional clutch - 6 Spd. Manual Transmission 02X All Wheel Drive





Bolt length: 22.5 mm 60 Nm +90 degrees 1/4 turn

Bolt length: 43 mm 60 Nm +180 degrees 1/2 turn

Tighten gradually in several stages and in diagonal sequence

Self-adjusting clutch (Sachs version) - 6 Spd. Manual Transmission 02X All Wheel Drive





Bolt length: 22.5 mm 60 Nm +90 degrees 1/4 turn

Bolt length: 43 mm 60 Nm +180 degrees 1/2 turn

Tighten all six bolts consecutively in clockwise direction and in steps of 90 degrees (1/4 turn) until the housing makes contact with flywheel.

Clutch with SAC pressure plate (LuK version) - 6 Spd. Manual Transmission 02X All Wheel Drive





Bolt length: 22.5 mm 60 Nm +90 degrees 1/4 turn

Bolt length: 43 mm 60 Nm +180 degrees 1/2 turn

Tighten all six bolts consecutively in clockwise direction and in steps of 90 degrees (1/4 turn) until the housing makes contact with flywheel.


When installing a new clutch plate in conjunction with a used SAC pressure plate, the adjuster ring in the pressure plate has to be reset by turning it back as far as it will go. If you do not reset the adjuster ring in the pressure plate, the SAC pressure plate will operate with reduced clamping force, which will cause excessive wear, especially of the clutch plate (clutch will then slip).