Rear Parking Aid Sensors, 2-Door

Rear Parking Aid Sensors, 2-Door

Removing





- Remove the bolts - 1 - and - 3 - on the lower section of the bumper cover - 2 -.

- Unclip the lower section of the bumper cover - 2 - from the bumper cover - 1 - beginning above the tailpipe in the sequence - arrow A to arrow C -.





- Reach from below behind the bumper cover and press both retaining tabs to the side - arrows - while pressing the sensor - 2 - through from the outside to the inside.





- Disconnect the electrical connector - 1 - on the sensor.

Installing

Install in reverse order of removal, observing the following:

- Install the lower section of the bumper cover.