Bumper Cover Lower Section

Bumper Cover Lower Section

Removing






Proceed as follows:

- Remove the bolts - 1 and 3 - on the bottom section of the bumper cover - 2 -.

- Unclip the bottom section of the bumper cover - 2 - from the bumper cover - 1 - in the sequence - A to C arrows - beginning above the tail pipe.






Installing

• For the correct tightening specifications; refer to => [ Bumper Cover Overview ] Bumper Cover Overview.

Install in reverse order of removal. Note the following:

- When pressing on, make sure the end points are guided into the bumper cover before pressing on for the final time.