Manual Front Seat Overview

Manual Front Seat Overview

• The overview is based on the driver seat. The passenger seat is similar and the components are installed reversed from left to right.

• The illustration does not show the floor covering.






1 Connector Station

• Connector routing, refer to => [ Connector Station Connectors ] Connector Station Connectors

2 Cover

• For connector station

• Removing and installing, refer to => [ Front Seats Service Position, Setting ] Front Seats Service Position, Setting

3 Connector

• With a corrugated tube for the modular wiring routing

• Modular wiring routing, assembly overview, refer to => [ Modular Wire Routing Overview ] Modular Wire Routing Overview

• Modular wiring with corrugated tube on front seat, refer to => [ Modular Wire Routing with Ridged Tube on Front Seat ] Modular Wire Routing With Ridged Tube on Front Seat

4 Storage Compartment

• Vehicles with special equipment

• Removing and installing, refer to => [ Storage Compartment ] Storage Compartment

5 Seat Forward/Back Adjuster

• Seat forward/back adjustment handle, removing and installing, refer to => [ Seat Forward/Back Adjustment Handle ] Seat Forward/Back Adjustment Handle

• Seat forward/back adjuster release cable, removing and installing, refer to => [ Seat Forward/Back Adjuster Release Cable ] Seat Forward/Back Adjuster Release Cable

6 Spindle Cover

• Quantity: 2

• Clipped to the seat forward/back adjustment spindle

• Removing and installing, refer to => [ Seat Rail Spindle Cover ] Seat Rail Spindle Cover

7 LATCH Child Seat Anchor

• Vehicles with special equipment

• For the front passenger seat only

• Removing and installing, refer to => [ LATCH and Top Tether Child Seat Anchors ] LATCH and Top Tether Child Seat Anchors

• Check after accident => [ Child Seat Anchors LATCH and Top Tether, Checking After A Crash ] Child Seat Anchors Latch and Top Tether, Checking After A Crash

8 Belt Latch

• Removing and installing, refer to => [ Front Belt Latch ] Front Belt Latch

9 Tunnel Side Trim

• Removing and installing, refer to => [ Trim, Tunnel Side ] Trim, Tunnel Side

10 Standard Front Seat (Manual)

• Removing and installing, refer to => [ Manual Standard Front Seat ] Manual Standard Front Seat

Optional equipment:

• Seat and backrest heating

11 Headrest

• Manual

• Removing and installing, refer to => [ Headrests with Locking Mechanism ] Headrests With Locking Mechanism

12 Entry Assistance Backrest Release

• Assembly overview, refer to => [ Entry Assistance Overview ] Entry Assistance Overview

• Removing and installing, refer to => [ Entry Assistance Handle with Bracket ] Entry Assistance Handle With Bracket

13 Backrest Adjusting Wheel

• Removing and installing, refer to => [ Backrest Adjusting Wheel ] Backrest Adjusting Wheel

14 Cover

• Only behind on the seat rail, sill side

• Removing and installing, refer to => [ Seat Rail Cap ] Seat Rail Cap

15 Screws

• Quantity: 4

• 50 Nm

16 Cover

• For the seat rail

• Quantity: 4

• Removing and installing, refer to => [ Seat Rail Cover ] Seat Rail Cover

17 Seat Height Adjuster

• Removing and installing, refer to => [ Seat Height Adjuster ] Seat Height Adjuster

18 Actuator

• For the lumbar support

• Lumbar support adjustment switch, removing and installing => [ Lumbar Support Adjustment Switch ] Lumbar Support Adjustment Switch

• Four-way lumbar support, removing and installing => [ Four-Way Lumbar Support ] Four-Way Lumbar Support

19 Sill Side Trim

• Removing and installing, refer to => [ Trim, Sill Side ] Trim, Sill Side