Lock Overview

Lock Overview

• The illustration only shows the left 1/3 section of the backrest. The backrest lock on the right 2/3 section of the backrest is similar.






1 Backrest Shell

2 Trim

• For locking

3 Locking Tab

• For the correct allocation, refer to the Electronic Parts Catalog (ETKA)

• Removing and installing, refer to => [ Lock, Removing and Installing ] Lock, Removing and Installing

4 Release Cable

• With handle for remote release

• To the connector station

• Removing and installing, refer to => [ Release Cable with Remote Control Unlock Handle ] Release Cable With Remote Control Unlock Handle

5 Screws

• 2 per retainer

• 25 Nm

6 Release Cable

• From the backrest lock to the connector station

• With retaining clip

• Removing and installing, refer to => [ Release Cable, Separating from Connector Station Retainer ] Release Cable, Separating From Connector Station Retainer

7 Connector Station

• For the cable with handle for the remote release

• For the cable from the lock to the backrest

8 Cable Tie

• Replace

9 Retaining Clip

• Release cable delivery package