Lock Trim Overview

Lock Trim Overview






1 2/3 Right Backrest

2 Right Trim

• For locking with locking cylinder

• Vehicles with special equipment

• Removing and installing, refer to => [ Lock Trim, with Lock Cylinder ] Lock Trim, With Lock Cylinder

3 Protective Cap

• For lock cylinder

• Remove before installing the lock cylinder

The key must be inserted in the lock cylinder correctly before the protective cap is removed. If that is not done, the tumblers and compression springs can fall out and the lock will be ruined.

4 Lock Cylinder

• Removing and installing, refer to => [ Lock Cylinder ] Lock Cylinder

• Only remove and install the lock cylinder with the key inserted correctly. If that is not done, the tumblers and compression springs can fall out and the lock cylinder will be ruined.

• Check the installation position when installing the lock cylinder. It is not possible to lock the backrest correctly if the installation position is not correct.

5 Key

6 Right Trim

• For lock with a lock cylinder

• Vehicles with special equipment

• Removing and installing, refer to => [ Lock Trim, without Lock Cylinder ] Lock Trim, Without Lock Cylinder

7 Left Trim

• For lock with a lock cylinder

• Vehicles with special equipment

• Removing and installing, refer to => [ Lock Trim, without Lock Cylinder ] Lock Trim, Without Lock Cylinder

8 Left Trim

• For locking with locking cylinder

• Vehicles with special equipment

• Removing and installing, refer to => [ Lock Trim, with Lock Cylinder ] Lock Trim, With Lock Cylinder

9 Left 1/3 Backrest